MobileTel: +86-755-82976821

MobileFax: +86-755-36815936

Location: Home > News > Industry News
Industry News

DIY Steel mesh balls

DIY Steel mesh balls


The CPU base iron placed in the first steel net Kuang (rigid net is 0.6mm tin hole) BGA IC on the iron above

put direct heating just network and upper and lower 2mm length and width of 3mm thickness of 0.5mm

magnet will network and BGA IC absorb fixed. The first steel mesh Kuang set on the second steel mesh

Kuang, sprinkle on the steel net solder ball (0.6MM<) using brush excess solder ball under the brush through,

0.6mm hole fell to the under a layer of steel net Kuang recovery


DIY stencil bumping

DIY stencil bumping

TAG:  DIY Steel mesh balls  solder ball
Hits:  【Printing