产品展示

当前位置: 网站首页 > 产品展示 > OCA 贴合设备 > OCA 真空贴合机
OCA 真空贴合机

12寸屏无泡真空贴合机

12寸屏无泡真空贴合机
12寸屏无泡真空贴合机 12寸屏无泡真空贴合机 12寸屏无泡真空贴合机
  • 加热方式heating thermostat
  • 型号12寸屏无泡真空贴合机
  • 工作电压220V AC
  • 额定功率1500W
  • 重量25kg

详细描述

12寸屏无泡真空贴合机

Freeshipping Vacuum Laminating Machine, OCA Vacuum Laminator For Refurbish LCD OCA Lamination Machine(No Need Remove Bubble)

Desktop Non-Bubble Laminating Machine with Vacuum Pump


advantage:No mold, no bubble
new function:vacuum laminating no need remove bubble


    Suitable for capacitive touch screen Cover plate (Cover Lens) and functional Glass Sensor (Glass) of OCA laminating process; Apply to the Touch screen (Touch Panel) and liquid crystal module (LCD Panel) of the OCA laminating process, at the same time can also be applied to other areas of membrane, glass to glass (glass) of hard in hard OCA laminating process.

Characteristics of the equipment:

No mold, no bubble;
Equipment imported from Japan SMC pneumatic components
A key to start, easy to operate;
Japan thermostat, the temperature can be accurate to ± 1 ° C
Japanese precision pressure regulator, pressure ± 0.001Mpa
Flat lamination way, the overall lamination, smooth uniform pressure, no stress concentration, no color pattern after lamination, no indentation, LCD chaos color, smaller convenient transportation.

Equipment technical parameters:


Device Power: AC220V 1500W power supply optional AC110V, AC220V, AC380V
Working pressure :0.4-0 .6 Mpa
Work environment :20-23 ° C, clean, dust-free
Fitting way: flat lamination
Productivity: 50s/1pcs
Heating mode: heating thermostat
Adapt Size: 7 "(according to customer requirements)
Equipment size: 320 * 292 * 370mm
Machine Weight: about 25kg (Packed by Wooden box for a safety shipping)

Equipment application:


This Vacuum laminating machine Suitable for capacitive touch screen Cover plate (Cover Lens) and functional Glass Sensor (Glass) of OCA laminating process; Apply to the Touch screen (Touch Panel) and liquid crystal module (LCD Panel) of the OCA laminating process, at the same time can also be applied to other areas of membrane, glass to glass (glass) of hard in hard OCA laminating process.


Characteristics of the equipment:


* Vacuum Laminating Machine, No need mold, almost no bubble;
* Equipment imported from Japan SMC pneumatic components
* A key to start, easy to operate;
* Japan thermostat, the temperature can be accurate to ± 1 ° C
* Japanese precision pressure regulator, pressure ± 0.001Mpa
* Flat lamination way, the overall lamination, smooth uniform pressure, no stress concentration,


Equipment technical parameters:


Device Power: AC220V 1500W power supply optional AC110V, AC220V, AC380V
Working pressure :0.4-0 .6 Mpa
Work environment :20-23° C, clean, dust-free
Fitting way: flat lamination
Productivity: 50s/1pcs
Heating mode: heating thermostat
Adapt Size: 6 "(according to customer requirements)
Equipment size: 320 * 292 * 370mm
Weight: Machine about 39kg


Tips:

1. This Vacuum Laminating Machine need to used with Vacuum Pump and Air Compressor together.
2.  For Vacuum Laminating Machine, both 220V and 110V are available. Please leave message which voltage machine you need.
3.  Demo Video will be provided. Vacuum Laminating Machinewill be packed by Wooden box for a safety shipping.
4. We sell whole set other OCA machine too(Such as separate machine, glue remove machine, oca film laminator, bubble autoclave machine etc and all acceossories), Please contact us if any concerns.

Vacuum Laminating Machine will be tested and pre-setting before ship out, no need to setup~
This Vacuum Laminating Machine NO NEED REMOVE BUBBLE~

分享到:
点击次数:  更新时间:2014-11-06 17:06:02  【打印此页】  【关闭
上一条:真空贴合机  下一条:LCD 拆屏机 947V2