auto air lock LY 888D non-bolts all in one hard to hard type OCA laminator 13 inches

Heating Type :
Model :888d
Voltage :
Rated Power :
Weight :

Detailed

Title 1:

2016 New auto air lock LY 888D non-screws all in one Hard-Hard type OCA laminator 13 inches

Title 2:

2016 New auto air lock LY 888D non-bolts all in one hard to hard type OCA laminator 13 inches

Thank you for using our products. For the safe of use of this new product, before operating this unit, please read these instructions completely and save this manual for future use. Please do not attempt to disassemble or modified the machine!

Usually our products can reach gold pressure value 6.8kg, that can be non bubble, oca attached super well effect!

INSTRUCTIONS

This is a newest upgraded 13 inch laminating debubbler in one machine, use hard to hard laminating working type, built-in air compressor and vacuum pump, with new auto air lock function, don’t need to fix or tighten screws on the top cover. Laminating and bubble remove only one step ,100% no bubbles.

Operating steps:

1. Plug in power line ,turn on the power switch .

2. Adjust laminating pressure to 0.5Mpa.

3. Touch system start , click "setting".

4. set the "vacuum time" to 15S,"laminating time" 25S,"Debubble time" 5-10M,"Laminating debubble temp"40degree,Click"comfirm",Click"automatic" preheat.

5. Open the machine cover lid , tear off the oca protect film.

6. Put the glass on lcd, then use one finger click the middle screen softly.

7. Put it to laminating area in order, close cover

8. Click “start “,vacuum air-removed start.

9. It will turn to bubble remove mode after 25 seconds automatically, it will automatic exhaust after debubble .

10. Take out the screen.

PARAMETER

SUPPLY: AC220V AC110V

POWER: 800W

SIZE: 420*350*330MM

WEIGHT: Near 40KG

TAG: OCA laminator