Copyright © 2014 www.lybga.com. All Rights Reserved. LiYang (LY) Welding Equipment Co., Ltd.
News
Contact
News
- [2015/06/01]BGA rework station before the operation will need to know
1. lead-free preheating temperature heating rate control in general 1.2~5 DEG C / S (s), the preheat..
- [2015/05/29]Why BGA welding preferred lead-free solder paste?
The trend of the development of semiconductor packaging is more and more high frequency, multi ..
- [2015/05/26]BGA tin graft method based
Tin, in the maintenance of the most commonly used but!Tin is good or bad, has great influence on the..
- [2015/05/25]Mobile phone BGA welding
With the volume of the mobile phone is more and more small, it is more and more high degree of in..
- [2015/05/23]How to Select a BGA Rework Station?
1.Introduction of BGA Defects are caused by many reasons during soldering SMD rework components a..
- [2015/05/22]DIY - Soldering BGA IC on PCB
More and more devices are shipped in small factor form packages like QFP and BGA. Some designers sti..
- [2015/05/20]Brief introduction of solder ball
The main function of solder balls is to connect semiconductor chips and lines with PCB boards, and t..
- [2015/05/19]How do the treatment should be produced in CAM BGA?
At present exist and BGA, and less than the distance to the design process of electric, electrical ..
- [2015/05/18]How to Remove an SMD Transistor
A transistor is an electronic component used extensively in all kinds of electronic circuits, such a..
- [2015/05/18]Hot Air BGA Removal
Using the modified REXC100 pre-heater and Aoyue hot air station with 38mm by 38mm BGA nozzle from Al..