Copyright © 2014 www.lybga.com. All Rights Reserved. LiYang (LY) Welding Equipment Co., Ltd.
News
Contact
Industry News
- [2015/06/23]BGA chip installation
1.BGA IC fixed: there will be a welding foot the coated on one side with the right amount of solder ..
- [2015/06/19]BGA Rework Recommendations
Removal and replacement of BGA packages on printedcircuit boards is fairly straightforward. Howe..
- [2015/06/17]BGA Reflow Soldering Recommendations
Rework Recommendations BGA Reflow Soldering Recomm..
- [2015/06/16]Hot air gun BGA welding method
It is very important to use the hot air gun to repair IC BGA.. Only master and application of good a..
- [2015/06/15]Lead free bridge chip graphics
Lead free bridge chip graphics 1. For lead-free motherboards, remove after first into the oven at..
- [2015/06/12]Method of detecting BGA welding quality
In terms of the BGA due to the solder balls on the chip below, completion of welding is hard to judg..
- [2015/06/09]Knowledge before BGA operation
Knowledge before operation: 1. lead-free preheating temperature heating rate control in general 1.2..
- [2015/06/08]Analysis of temperature curve of BGA reflow soldering
At that time, we got the problem board to get ZTE electronic analysis, the results are BGA periphera..
- [2015/06/06]BGA preservation and use
BGA device is a highly temperature sensitive element, so BGA must be kept at a constant temperature..
- [2015/06/04]BGA welding traditional method and the latest method
With the progress of science and technology, industrial production but also the birth of a new way o..