Copyright © 2014 www.lybga.com. All Rights Reserved. LiYang (LY) Welding Equipment Co., Ltd.
News
Contact
News
- [2015/07/08]Detail steps for BGA of the disassembly
Detail steps for BGA of the disassembly 1.The surface of table will need to remove the BGA assemb..
- [2015/07/07]Motherboard BGA chip welding
Motherboard BGA chip welding Put the main board on the welding frame and place the chip on the mi..
- [2015/07/06]About the problem of heating equipment BGA rework station
About the problem of heating equipment BGA rework station Starting from the principle of physics,..
- [2015/07/04]Cause and solution of air bubble in BGA
Cause and solution of air bubble in BGA Bubble in BGA The bubbles in BGA mainly depend on the ad..
- [2015/07/02]Analysis of BGA welding process
"Desoldering device" is quite important operation and adjustment, the temperature, the second, air p..
- [2015/07/01]BGA balls techniques and methods
What is the "paste" + "ball"? In fact, this is recognized as the best most standard ball planting me..
- [2015/06/30]Disassembly, welding technique of patch type components
SMD components, removing welding should choose 200 to 280 DEG C temperature controlled soldering iro..
- [2015/06/29]Optical alignment BGA rework station
Installation is in optical alignment system, high performance BGA rework station by optical system ..
- [2015/06/27]BGA welding process requirements
In the assembly process of BGA, every step, every tool will have an impact on the welding of BGA. ..
- [2015/06/24]Solder on the use, nature and development
With the reflow technology, solder paste has become a Surface Mount Technology (SMT) the most im..